You can use following methods to verify if FAS is running:
This is the most recommended way to check if FAS service is up and running, as it allow you to check if individual components are up and running:
You can access Management Console Via: https://<fas_master_node_ip>:9990
Once authenticated you should be able to see status of Master node showing, three processes "Active":
If you are running HA cluster, change Server from Top-Left drop down to Select Slave node and click Done, you should see Two active processes showing Slave noad is running:
Following command can be used to check if fas service is running:
service fas status
Output of above command should either print PID for running FAS service or should indicate that Service is not running.
If Service is running and above command return a PID, proceed to check Java Process as below.
Following command can be used to check if java process related to FAS server are running:
ps -ef | grep <pid from service fas status command> -wc
Output of above command will return:
- 6 If It is a FAS Master Node
- 5 If it is a FAS Slave Node
Although above command will confirm that Java Process is up and running but to make sure all modules have been started correctly, Management Console method outlined at the top if this article must be used.